Data Logging

[Arch]

Yet another query lol.

I seem to have an issue with my data logging, no doubt finger trouble on my part.

I can go into Scfg and see all the data logging items selected so that is set up correctly but I do not seem to get all the data logs from events that I have been too recently. I have some data logs from periods when the car is at low revs (idle) but nothing from the actual runs themselves which is less than ideal.

Is there anything I should be checking?

[stevieturbo]

Yet another query lol.

I seem to have an issue with my data logging, no doubt finger trouble on my part.

I can go into Scfg and see all the data logging items selected so that is set up correctly but I do not seem to get all the data logs from events that I have been too recently. I have some data logs from periods when the car is at low revs (idle) but nothing from the actual runs themselves which is less than ideal.

Is there anything I should be checking?

SCfg only sets the parameters to be recorded and the frequency rate they are recorded.

Logging start/stop parameters are set in Scal

http://www.syvecs.com/downloads/Syvecs% ... 20V1.1.pdf