Page 12 of 14
					
				Re: EGT probes
				Posted: Sat Apr 29, 2023 4:36 am
				by RICE RACING
				And another one, a 'mild' street car set up with ~1870+hp on chassis dyno.
All other probes 
thrown in bin as these (customers words) are only ones worth using cause they actually respond in time, show what is happening, and to date not a single one needing to be replaced.
Any small setting difference is immediately reported, as are ignition miss fires, stop guessing, go 
donmega!
			
		
				
			 
- donprobesyolez.jpeg (166.15 KiB) Viewed 113188 times
 
			
		
				
			 
- isdonisgood.jpg (642.34 KiB) Viewed 113188 times
  
			
					
				Re: EGT probes
				Posted: Tue May 02, 2023 4:06 pm
				by RICE RACING
				STREET CAR 
fact v fiction, cause no one races on a dyno !
when you really need probes that will do what no others can, there is only one, the donmega !
			
		
				
			 
- don probes track yo!.jpeg (82.48 KiB) Viewed 113166 times
 
			
		
				
			 
- dyno v track donmega.jpg (940.75 KiB) Viewed 113166 times
  
			
					
				Re: EGT probes
				Posted: Wed May 03, 2023 5:59 am
				by RICE RACING
				REAL STREET CAR
Full length exhaust, no homo side pipes or cut outs 
Power in reality matches dyno claims,, no fake fuel flow model 'guessed' numbers
Durability and accurate engine settings only offered by, tried, tested, & proven 
donmega probes
*GET ON IT !*
			
		
				
			 
- 4.5 inch cunts.jpeg (246.11 KiB) Viewed 113158 times
 
			
		
				
			 
- FT PRO 1.jpg (48.77 KiB) Viewed 113158 times
  
			
					
				Re: EGT probes
				Posted: Wed May 03, 2023 6:09 pm
				by stevieturbo
				What is it ? a Supra or something ? What box ?
7's are flying
			 
			
					
				Re: EGT probes
				Posted: Thu May 04, 2023 1:07 am
				by RICE RACING
				stevieturbo wrote: Wed May 03, 2023 6:09 pm
What is it ? a Supra or something ? What box ?
7's are flying
 
That track run had powerglide
Also ran with a K&N air filter ! and full length exhaust, no NOS used over the 400m either unlike others 

was at low boost 60psi ~1600hubhp
			
		
				
			 
- donmega RX7.jpg (632.43 KiB) Viewed 113134 times
  
			
					
				Re: EGT probes
				Posted: Thu May 04, 2023 3:32 am
				by RICE RACING
				Today and another more serious 'race car' with about double the power! swapping over to the 
donmega probes, when you really want to know what is going on then these are the FINAL SOLUTION 
			
		
				
			 
- FINAL SOLUTION 5.jpeg (239.18 KiB) Viewed 113123 times
 
			
		
				
			 
- FINAL SOLUTION DONMEGA 3.jpeg (132.33 KiB) Viewed 113123 times
  
			
					
				Re: EGT probes
				Posted: Thu May 04, 2023 6:17 am
				by RICE RACING
				Couple more race cars seeing the light ................ 
donmega probes for all !
			
		
				
			 
- FINAL SOLUTION 6.jpeg (159.67 KiB) Viewed 113114 times
 
			
		
				
			 
- FINAL SOLUTION DONMEGA 1.jpeg (149.43 KiB) Viewed 113114 times
  
			
					
				Re: EGT probes
				Posted: Fri Jun 23, 2023 9:10 pm
				by RICE RACING
				An update,
This car running *DONMEGA EGT PROBES* ran 7.17 seconds @ 202+mph yesterday
If you want to run fast consistent and reliably making each cylinder contribute its best on methanol fuels then you should be using a probe that will let you see what is happening ............
https://www.facebook.com/dragimportmedi ... 252899548/
RICE RACING wrote: Wed May 03, 2023 5:59 am
REAL STREET CAR
Full length exhaust, no homo side pipes or cut outs 
Power in reality matches dyno claims,, no fake fuel flow model 'guessed' numbers
Durability and accurate engine settings only offered by, tried, tested, & proven 
donmega probes
*GET ON IT !*
4.5 inch cunts.jpeg
FT PRO 1.jpg
 
 
			
					
				Re: EGT probes
				Posted: Mon Jun 26, 2023 11:34 pm
				by RICE RACING
				https://youtu.be/I33IeZF5ovo
^ Here is video of the pass for those who get hard watching others perform
			
		
				
			 
- 2JZ11.JPG (502.19 KiB) Viewed 108785 times
 
RICE RACING wrote: Fri Jun 23, 2023 9:10 pm
An update,
This car running *DONMEGA EGT PROBES* ran 7.17 seconds @ 202+mph yesterday
If you want to run fast consistent and reliably making each cylinder contribute its best on methanol fuels then you should be using a probe that will let you see what is happening ............
https://www.facebook.com/dragimportmedi ... 252899548/
 
 
			 
			
					
				Re: EGT probes
				Posted: Mon Jul 10, 2023 4:20 am
				by RICE RACING
				Have a few more examples to share for the benefit of all following here, some will be more general in nature being applicable to a larger percentage of users, then others for the elite but all of them regardless remove one thing 
BLAME GAME !
Try to put it in a format that is understandable (if you are here then you are already one step ahead of most TBF) but should get people more access to what is otherwise closely guarded information that you just don't get on a pay to play education platform or A typical sponsored GagTube rantings  
 
			
		
				
			 
- NOT FLINSTONES PEDAL CAR.jpeg (61.74 KiB) Viewed 105271 times